XTOOL TP150 TPMS Programming Tool (Clearance)

• Works on Both 315Mhz & 433Mhz Sensors
• Relearn All TPMS Sensors
• Activate All TPMS Sensors
• Check ECU-ID Matching Status
• Check Sensor Real-Time Data
• Program XTOOL Sensors
• Program Multiple Sensors Simultaneously
• Diagnose TPMS System: Read and clear TPMS codes
• Reset TPMS Warning Light
• Check OE Sensor Information: Check OE Sensor Brand, Part No., sensor frequency etc.
• Test Records
• Built-In Rechargeable Battery
• Internet Update via WIFI and USB Connection
• Lifetime Software Updates

The user can use this function to program the sensor data to a blank XTOOL sensor to replace the sensor with insufficient power and not working properly.Provides Four sensor programming methods: automatic, manual and copy by activation.

• Generate Sensor ID Automatically: Automatically create a new unique ID(s) into TS100 sensors. After programming the TS100, you need to perform tpms relearn to match the new sensor ID to vehicle's ECU. If you don't know the original sensor ID or your original sensor was bad, you could choose this method.
• Input Sensor ID Manually: Input the ID manually into the new installed TS100 sensor. You can find the ID on the original sensor. If you know the original sensor ID(the original sensor cannot be activated) and the tire/sensor position has not been changed, you could choose this method.
• Via Activate Copy Sensor ID: Trigger the original sensor, get the ID and and copy the ID to the new sensor. If your original sensor works and can be activated, and the tire/sensor position has not been changed, you can choose this method.
• Via Read ECU Copy Sensor ID: Diagnose the vehicle TPMS and get the ID, copy it to the new sensor. If your original sensor is missing and the ID can be read after diagnosis on the car, and the tire/sensor position has not been changed, you can choose this method.

Note:1.TPMS programming only work with XTOOL TS100 sensors. 2.TS100 sensors are not included in the tool kit!3.Relearn is needed for Method 1; relearn is no need for Method 2,3,4.4.As for method 2,3,4, please note that the damaged OE sensors should not be placed on the vehicle while programming, as they can cause data interference.**Please check the compatibility seller before purchase!