SmartSafe iSmartTool ST06 Scan Tool with TPMS, Battery Tester & Printer

• Battery: In-car & out-of-car inspection. Battery health test, start-up test and charging test. Battery bar code scanning. Battery matching.
• TPMS: Coverage: over 98% of vehicles with tire pressure system in the world. 315 MHz/433 MHz tire presser sensor activation and matching learning. Tire pressure data reading: pressure, tire temperature, battery status, etc. Reading/coping/writing sensor ID value, compatible with OE and Launch universal sensors, you can see the Launch universal sensor here 
• Diagnose: Full system and full function diagnosis of more than 100 automobile brands in the world. Version information reading, code reading, code clearing, data flow reading, activation test, special function, etc.
• Maintenance: Support 26 common maintenance functions, such as maintenance light reset, throttle matching, brake pad replacement, steering angle reset, anti-theft matching, ABS bleeding injector coding, DPF regeneration, sunroof initialization, Gearbox matching, etc

The SmartSafe/Launch iSmartTool ST06 tool is a powerful TPMS and diagnostic scanner tool, suitable for more than 98% of vehicles equipped with tire pressure system in the world. SmartSafe ST06 is specially developed for repair shops and tire centres to diagnose tire sensor faults. Therefore, iSmartTool ST06 is your ideal choice.

ST06 is not only a tire pressure sensor tester but also a multifunctional tool that integrates battery testing and car diagnosis. Regarding car diagnostics, it provides a more comprehensive solution for repair shops.

• Test Report: Support the display of battery tests, tire pressure monitoring, fault detection, data flow and other reports.
• Tool Software Upgrade: Support online upgrades, including model software, firmware software, and APP software
• Module Expansion: Support the expansion of videoscope functions
• Report Printing: Support printing reports through the built-in thermal printer

• Can test all automotive starting lead-acid batteries: ordinary lead-acid batteries, AGM flat batteries, AGM winding
  batteries, colloidal batteries, etc.
• Supports common battery standard test: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE and GB.
• The bad cell can be detected directly; Directly test the battery with power loss, and there is no need to fully charge it
  before testing.
• Directly detect the bad cell and batteries under voltage, no need to charge the batteries before testing.
• Polarity reverse connection protection function: battery clamp reverse connection will not damage the
  equipment, nor will it have any adverse impact on the car and battery.
• Test report: directly printed or shared by email to provide online report viewing

• CPU: 4 Core 2.0GHz
• System: Android
• Memory: 4GB
• Storage: 64GB
• Display Size: 5.99 inch
• Resolution: 720 X1440
• Battery Capacity: 4500mAh/7.6V
• Camera: 8MP
• Wi-Fi: 2.4GHz/5GHz
• Interface: DB15 diagnostic connection, Battery clip connector, USB Type A, USB Type C
• Working Temperature: 0~45°C
• Storage Temperature: -10~60°C
• CAN FD and DOIP compatible

• iSmartTool
• OBD Diagnostic cable
• Battery cable clamps
• External power adaptor
• USB cable
• Password envelope
• User manual
• Cigarette lighter cable
• OBD I adaptor box
• Non-16pin adaptor cable kit
• BMW 20, MB 38, Nissan 14+16, Mit 14+16, Kia 20, Toyota 17, Toyota 22, Hond 3, Fiat 3, Chrysler 6, GM 12 pins

45.5x18x39cm

6kg