SmartSafe ATF601+ Auto Transmission Cleaner and Fluid Exchanger

• Equipped with a convenient used oil sampling function
• Preheats the new oil
• Can be used with smart teminals for remote control
• Automatically identify the oil inlet and outlet direction of the transmission
• Equipped with a variety of special adapters, suitable for models in various countries
• Supports adding cleaning agents to perform cyclic cleaning of automatic transmissions
• Intelligent electronic control automatically replaces new and used oil in equal amounts
• Provides a rich database of vehicle models, eliminating the need to manually set the oil volume
• Equipped with oil temperature display and oil filter replacement reminder function

What Can Be Solvedin Your Shop:

Used Oil Sampling;

Automatically collects used oil from the transmission.

Transmission Oil Level Adjustment

Customizes oil level adjustments, refilling or draining the set transmission oil amount.

Transmission Oil Replacement

Automatically identifies transmission inlet and outlet ports, enabling equal-volume replacement of transmission oil.

Transmission Oil Circulation Cleaning

Cleaning agent can be added to perform cyclic cleaning of the automatic transmission.

Draining used and new oil from equipment;

It can automatically drain the transmission oil in the new and used oil barrels of the equipment.

Vehicle model data customization;

Supports custom addition of common automatic transmission maintenance vehicle model data.

Printing

Supports printing of equipment execution results and customizable repair shop information.

Remote Control

Supports connection with Android tablets to remotely control device operation.

Power Supply	AC 110V/AC 220V 50Hz/60Hz
Maximum power	3500W
Pressure gauge	0~200psi
Oil outlet pipe	2.5m
Oil retum pipe	2.5m
Oil drain pipe	1.2m
Relative humidity	<90%

Filter accuracy	5μm
Oil change rate	2L/Min
Oil tank	20Lx2
Equal replacement error	士100ml
Ambient temperature	-10C~+50°C
Filter element service life	About 1 year(once used per day on average)

 

Make Your Products Last Longer

Pay attention to each connection to check if there is any leakage during fluid exchange. When any leak is found, stop the ATF601 immediately and check for the unit. Start to exchange fluid again after reconnection is made.

Before cleaning up the unit, the used fluid should be drained out from the used fluid tank and the new fluid should be drained out from the new tank and stored in the container after every usage to protect the electronic scale on the no-load state at non-work conditions.

Keep the new fluid tank clean.

Please recalibrate the electronic scale after replacing the main-board and/or the electronic scale itself.

72.2 x 70.5 x 119.5 cm

NW 79kg

GW 109kg