Micsig ATO2004 Automotive Oscilloscope - 10.1 Inch Full Touch Screen - 200MHz BW

The ATO2004 is an innovative automotive oscilloscope that is the world's first oscilloscope in mobile field use that can be operated purely via the 10.1 inch touch screen and provides comprehensive automotive diagnostic functions. Battery operation can last up to 4 hours and can be extended indefinitely by replacing with a spare battery if required.

The ATO2004 focuses on automotive diagnostics, and offers high usability through the use of an Android operating system. The device also has an external trigger output so that it can be used as an equivalent table oscilloscope in the laboratory.  In addition to serial bus decoding, the ATO2004 also offers various automotive diagnostic functions, such as charging and starting circuit tests, pressure tests such as cylinder compression and fuel pressure. 

The ATO2004 features a 2GHz sampling rate, 220 Mpts memory depth, a signal acquisition rate of up to 300,000 wfm/s, 4 channels, 200 MHz bandwidth and 4 channels. In addition, the touch LCD display offers a resolution of 1280 * 800 pixels, which also supports multi-touch operation. The oscilloscope app (IOS & Android) allows remote control of the oscilloscope via WIFI. In addition, the oscilloscope has a USB and Ethernet interface.

The touch operation of the Micsig ATO2004 is extremely intuitive. This simple operation is indispensable for users of smartphones and tablets today, but it is new and innovative for an oscilloscope. Thanks to the digital trigger system, trigger jitter is very low and triggering is highly precise. In addition, the oscilloscope supports serial bus triggers and bus decoding.

• Integrated automotive diagnostic software
• Comprehensive presets for automatic diagnosis
• Lifetime free software online upgrade
• compact oscilloscope with 4 channels
• Bandwidth of 200 MHz
• 2 GS/s real-time sampling rate.
• Android operating system
• Replaceable battery
• Up to 220 Mpts memory depth.
• 300.000 Wfms/s acquisition rate 
• 10.1"/20.3 cm industrial LCD, 1280x600 resolution, capacitive multi-point touch screen.
• Interfaces: Wi-Fi, USB 3.0/2.0 host, USB Type-C, HDMI, trigger output, ground
• Connection for probe calibration.
• Bus trigger and decoding supported: UART, I²C, SPI, CAN, CAN FD, LIN, Flexray.
• PC software, iOS and Android mobile app for remote control of the oscilloscope.
• Built-in 32 GB memory for waveform and video recording.
• Lithium battery, battery life up to 2 hours.
• Screen sharing via wifi, USB and HDMI
• Portable tablet design with all-in-one functions

• Charging/Start Circuit: 12V&24V charging, Alternator AC Ripple, Ford smart Alternator, 12V&24V Start, Cranking Current
• Sensor: ABS, Accelerator Pedal, Air Flow Meter, Camshaft, Coolant Temperature, Crankshaft, Distributor, Fuel pressure, Knock, Lamda, MAP, Road Speed, Throttle Position
• Actuators: Carbon Canister Solenoid Valve, Diesel Glow Plugs, EGR Solenoid Valve, Fuel Pump, Idle Speed Control Valve (IAC), Injector (Petrol), Injector (Diesel), Pressure Regulator, Quantity Control Valve, Throttle Servomotor, Variable-speed cooling fan, Variable Valve Timing
• Ignition: Primary, Secondary, Primary + Secondary
• Networks: CAN High & CAN Low, CAN FD, FlexRay, K line
• Combination Tests: Crankshaft + Camshaft, Camshaft + Primary Ignition, Primary ignition + Injector Vol, Crankshaft + Camshaft + Injector Vol.+ Secondary Ignition

Timebase range	1ns/div ~ 1ks/div(ATO3004/ATO3002/ATO2004);2ns/div ~ 1ks/div(ATO2002/ATO1004)
Support Test	Charging/Start Circuits, Sensors, Actuators, Ignition, Networks (CAN L/H, CAN FD, LIN, Flexray, K line), Combination Tests
Bus decoding	RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C
Interfaces	Wi-Fi, USB 3.0/2.0 Host, USB Type-C, Grounding, HDMI, Trigger out
Storage	32GB
Display	10.1 Inch LCD capacitive touch display，1280*800 resolution，11*10 grids
Battery	7.4V,7500mAh Li-Ion battery
Size/Net weight	265*192*50mm / 1.9kg（with battery）