Micsig 12 Bit AHO14-200 Oscilloscope Standard Kit
The Micsig 12 Bit AHO14-200 oscilloscope features a 200 MHz bandwidth, an integrated multimeter, and a 16800mAh battery.
The Micsig AHO1 series is a professional, high-resolution automotive oscilloscope for vehicle diagnostics. It features a 12-bit ADC, 200 MHz bandwidth, 4 analog channels, a real-time sampling rate of 1 GSa/s, and a memory depth of 110 Mpts.
Thanks to its ultra-slim design, measuring only 3.1 cm, its integrated, powerful Li-ion battery and USB Type-C charging port, it is ideal for mobile and outdoor repairs.
With an innovative dual software architecture for general applications and vehicles, and special test modes for engines, sensors and electric vehicles, it supports both combustion engine and electric vehicle diagnostics, helping technicians to fix faults faster and increase service efficiency.- Integrated full-featured multimeter with 4⅚ digits
- Powerful signal acquisition and analysis features
- Various sensors / actuators / CAN / LIN / FlexRay / ignition systems
- HDMI function for training and education
- Integrated 16800 mAh battery for up to 4 hours of runtime
- Android operating system with helpful additional applications
- 4 channels, 200 MHz bandwidth & 1 GS/s real-time sampling rate.
- Up to 110 Mpts storage depth and 78,000 Wfms/s capture rate
- 8-inch TFT LCD multi-point touchscreen with anti-glare coating and very good screen-to-body ratio
- Interfaces: Wi-Fi, USB 3.0/2.0 Host, USB Type-C, HDMI, Trigger Output, Grounding
- Bus triggering and decoding supported: RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, MIL-STD1553B
- PC software, iOS and Android mobile app for remote control, screen sharing and data transfer with the oscilloscope.
- Supports charging via USB Type-C
- Free lifetime online software updates
- Two selectable software options: Automotive and Standard Oscilloscope
The AHO1 series oscilloscope innovatively incorporates a 4⅚-digit multimeter function, supporting a variety of measurements including voltage, current, resistance, continuity testing, diode testing, and capacitance measurement. There's no need to carry an additional multimeter, as it can meet a diverse range of testing requirements. Furthermore, the system supports simultaneous operation of the oscilloscope and multimeter with seamless switching, greatly enhancing on-site work efficiency and convenience.
Bandwidth 200MHz Analog channels 4 Real-time sampling rate 1GSa/s Rise Time ≤1.75ns Memory Depth 110Mpts Vertical Resolution 12bit Max. waveform capture rate 50,000wfms/s Interfaces USB 3.0 Host、USB Type-C、LAN、HDMI Support test Charging/Start Circuits, Sensors, Actuators, Ignition, Networks (CAN L/H, CAN FD, LIN, Flexray, K line), Combination Tests Display 8" TFT LCD capacitive touch screen, 1280*800 pixels Battery 3.7 V、16000mAh Lithium-ion battery Charging Standard DC 12V adapter, supports Type-C 5V charging Multifunction Meter Accuracy 4⅚ Digits Dimension 265*174*31mm（Width x Height x Thickness） 32 x 27 x 17 cm
3.33kg