Launch X431 X-PROG 3 Immobilizer Key Programmer

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

X-PROG 3 User Manual

Launch X-Prog 3 Review: Advanced IMMO & Key Programmer

LAUNCH X-PROG3 ADVANCED IMMOBILIZER & KEY PROGRAMMER - UNBOX

Launch "IMMO PROG" Module Introduction Supported by IMMO Pro/Pad and X-PROG 3

Product Insight: Launch IMMO PAD and X-PROG3

Mega Update in IMMO Program Software from V10.03 to V10.07

EEPROM Read and Write by Launch IMMO Pad/Pro or X-PROG 3

Bosch/Siemens Engine ECU EEPROM and Flash data backup and restore by IMMO Pro/Pad or X-PROG 3

BMW

BMW CAS3/CAS3+ Smart/Remote Key/Fob All Key Lost Programming via Launch IMMO Pro/Pad or X-PROG 3

Add Key BMW E92 LCI by Launch XProg - Launch Thinktool Pros

BMW EGS ISN clear by LAUNCH X-PROG - After Replacement Gearbox F-chassis & G-chassis

X-PROG | BMW 8HP EGS ISN Refresh | LAUNCH

BMW DME MSV90 ECU CLONE with LAUNCH X431 IMMO PAD

MERCEDES BENZ

X-PROG 3 | Erase anti-theft data for Mercedes Benz ECU | LAUNCH

Mercedes Benz ECU erase ME9.7 ECU & 722.9 TCU with X431 PAD V + X-PROG3

VASS

Audi A5 replace used Gearbox with LAUNCH X431 X-PROG3 Clone function

X-PROG 3 | TCU Clone for Audi A5 | LAUNCH

AUDI VW After replace transmission unlock by X-PROG on X431 PAD V

Clone TCU For Audi A5 By Launch Xprog 3 Programmer---VXDAS.COM

X-PROG | IMMOBILIZER PROGRAMMER - AUDI MQB TRANSMISSION TCU LOCKED | LAUNCH

X-PROG | 5th Generation Immobilizer Add New Key | LAUNCH

OTHER

 

March 2023

1. Add CAS2, CAS3/3+ IMMO system file generated key function, supported to acquire EEPROM after CAS module read and generate dealer key using EEPROM file

2.FRM module replacement, add FRM module data function, supported to download FRM module data with internet connection.

3. Adds OBD preprocessing function for BMW BDC IMMO system (program BMW BDC key via OBD)

V10.80 (May 25th, 2023)

1. Added the key learning and instrument replacement functions for Johnson Control MQB instruments (including chips A2C81589600, A2C81589700, D70F3526, and D70F3529).

2. Added the key learning, all keys lost, and instrument replacement functions for Johnson control instruments as of year 2014

3. Added the instrument cloning function for VDO NEC 35XX MQB instruments (including chips A2C81 589600, A2C81 589700, D70F3526 and D70F3529)

4. Added the functions “All Keys Lost” and instrument replacement for the fourth-generation 35XX instruments.

Jan. 2024.
Adds MQB calculator. Obtain sync data for free.
Need 
Instrument panel CS code 16 bytes
Ecu 16 bytes CS code
Tcu 16 bytes CS code
ELV 16 bytes CS (if present)

V10.95 (Feb 28th, 2024)

1) Added a total of 48 RH850_encrypted single-chip machine read and write functions,
including R7F701008, R7F701011, R7F701016, R7F701021, R7F701OO9, R7F701012, R7F701017, R7F701022, R7F701026, R7F701002, R7F701010, R7F701013, R7R01018, R7F701023, R7F701027, R7F701014, R7F701019, R7F701024, R7F701028, R7F701032, R7F701040, R7F701042, R7F701044, R7F701046. R7F701050, R7F701003, R7F701015, R7F701020,R7F701025, R7F701029, R7F701033, R7F701041, R7F701043, R7F701045, R7F701047, R7F701051, R7F701030,R7F701034, R7F701048, R7F701052, R7F701054, R7F701056, R7F701006, R7F701007, R7F701049, R7F701053

2). Add a total of 13 VW IMMO MQB instrument read-out functions, including D70F3524, D70F3525_V1, D70F3525_V2, D70F3525_V3, D70F3525_V4, D70F3526_V1, D70F3526_V2, D70F3526_V3, D70F3526_V4, D70F3529, D70F3532_V1, D70F3532_V2, D70F3537

3). Added OBD pre-process function for BMW FEM/BDC immo system.