top of page

How To Guide:

Source: OBDSTAR

OBDSTAR Suzuki GSX FI Add A Key

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk.  We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide.  Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them.  We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Background

Add a new key for a SUZUKI GSX FI motorcycle.


Preparation

A new key, MS80, M001A , P001 kit, P002 adapter, M054.


Tips

Please get a pincode before adding a key. Pls keep MS80 in charging and communication in the whole process. It needs to switch key modes(working/disable) while key programming. Pls read switching key modes help data files in SUZUKI GSX FI menu before your operation.


Solutions

Using OBDSTAR MS80 to operate on【Add a Key】.


Details Steps

①Connect MS80 to Motorcycle, enter into【MOTO IMMO】 ;

②Click【All】 , input letters such“SU” in search bar, click【SUZUKI】 ;


Tips: by searching keywords, find out related models quickly.

③Click the newest SUZUKI edition;

④Click【GSX FI】 ;

⑤Click【2016-2019】 ;

⑥Click【PROXIMITY】 ;

⑦Click【Read Pincode】 ;

⑧Connect the wires and equipment according to the wiring diagram, click【Enter】 ;


Tips: can click【Operation Instruction】 to check wiring diagram in details.

⑨Remember or take note the pincode, click【Enter】 ;

⑩Unplug P001 and disconnect the 12V power supply for 10 seconds before connecting, click【Enter】 ;

⑪Caution! Pls disconnect the point at the picture below before adding a key, or it leads to a failure.

⑫Click【Add a Key】 ;


Tips: can click【Switch Key Mode】 to check how to switch key mode in manual.

⑬Connect the wires and equipment according to the wiring diagram, click【Enter】 ;


Tips: can click【Operation Instruction】 to check wiring diagram in details.

⑭Please switch the new key to be programmed to the working mode and the other keys into the disable mode, click【Enter】 ;

⑮Input 4-digit pincode, click【Enter】 ;

⑯Click【Enter】 ;

⑰Please press the new key button in 10 seconds, click【Enter】 ;

⑱Program successfully.

Summary

Please strictly follow your device tips in your operation process.

bottom of page