Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: OBDSTAR
OBDSTAR 2020 Fiat Hybrid BCM Read IMMO Data
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
Background
Read IMMO Data by BCM, which can be used for showing IMMO information, making dealer keys, etc.
Note: The following steps are based on KEYMASTER G3 as an example, please strictly follow the device prompts to operate.
Preparation: KEYMASTER G3, OBDII main cable.
Detailed steps
1. Connect the KEYMASTAR G3 to the vehicle by the OBDII main cable and enter【IMMO 】interface
2. Tap the search box in the upper right corner and search for【FIAT 】
3. Select【Manual Select System 】
4. Select【BSI(PRE-CODING) 】
5. Select【DELPHI 70F3632/70F3633(ID46) 】
6. Select【TYPE 3(2020-Hybrid) 】
7. Make sure the network is connected and tap【OK 】
8. Select【Advanced Functions 】
9. Select【Read IMMO Data 】
10. Turn on the ignition switch and tap【OK 】to start reading
11. Read successfully, tap【OK 】
12. Confirm the file name and tap【OK 】
13. Show IMMO Info.
