Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH VW Guided Functions Introduction Brake Reset
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
VW Guided Functions Introduction Brake Reset
Products Supported:
PRO3 and up
Models Supported:
All systems of all VW and AUDI models, supporting up to 2019MY
Function Introduction:
Guided functions have the powerful advantage of easy operation. Each guided function is a
complete function integrated by multiple basic functions, saving users from the tedious search for the channel number and login code of the corresponding function. Each function has the detailed operational help information and operating condition instructions. For vehicles of different models and configurations, specific operation guidelines are provided, offering hints for corresponding operations, such as, automatic login, matching, setting, coding and etc. With these guided functions, it is equivalent to having an expert who can provide ideas, help find maintenance manuals and test functions in the maintenance process of vehicles. At present, the comprehensive diagnostic products all over the world rarely support all guided functions for VW and AUDI.
Guided Functions Supported:
Support a total of over 30,000 functions for VW and AUDI, for example
Service Regeneration, Particle Filter (DPF)
Adapt Injector Correction Value
Reset Engine Control Adaptation Values
Throttle Learning
Fill Coolant Circuit
Adapt Values, SCR system
Activating/Deactivating Cruise Control System
Basic Setting of Transmission
Basic Setting of Sensors (-G85/-G200/-G201/-G251)
Basic Setting/Bleeding Brake System
Initial A/C Compressor Run-In
Adaptation Automatic Locking At 15 km/h
Distance Control System Calibration
Deactivate or Activate Airbags And Belt Tensioners
Adaptation Menu Key Multifunction Steering Wheel
Adapting Service Intervals
Service Interval Display, Resetting
Transport Mode, Switching Off/On
Level Control System Basic Settings
Brake Pad Change
Headlight Beam Adjustment
Battery Adaptation
Rear View Camera System Calibration
Driver Assistance Systems Front Sensor System Calibration
Etc.
Test Functions:
Replacement of electronic parking brake pads (replacement of handbrake pads) for Touareg
Background for Performing the Function:
1. This function ensures safe and effective maintenance of the electronic parking brake
system.
2. The main functions include placing the handbrake pads to the installation position,
checking the basic setting of the parking brake (checking the gap of handbrake pads), running-in and calibration of handbrake pads and etc.
The basic setting, running-in and calibration for the handbrake pads of Touareg cannot be
performed, if you use a device that does not support guided functions.
The operations can be executed if you use a device supporting guided functions. Please note that network connection is required by guided functions. Please download the sub-package for the corresponding model before proceeding.
Operation Instructions:
1. Turn on the ignition switch of the vehicle, connect the connector of Launch’s product, select the software (V28.55 or higher) for VW models. After entering, the following main menu shall be displayed. Select “Guided Functions”.
2. Select “7P- Touareg 2010>”.
3. Select the model as shows below and download the corresponding sub-package file:
4. After entering, it shows below, Select “System Selection”.
5. Select “53 Parking Brake”.
6. Select “53-Basic adjustment electro-mechanical parking brake”.
7. Check the item as prompted and click Complete/Continue after confirming that there is no problem.
8. Select Complete/Continue.
9. Ensure the voltage is stable and select Complete/Continue.
10. Choose according to the conditions and select YES here.
11. Please wait…
12. Turn off the ignition switch.
13. Keep ignition switch OFF and wait.
14. Turn on ignition switch
15. Please wait…
16. Select Complete/Continue after completing automatic coding.
17. Release electronic handbrake button as prompted and select Complete/Continue
18. Do not depress the brake as prompted and select Complete/Continue
19. Checking the brake pad clearance...Please wait!
20. Read the clearance. If the clearance is within the range, the function can be continued.
Otherwise, it is necessary to remove the rear wheels and repeatedly adjust the clearance to
make the clearance within the tolerance range. Then continue to execute the function by
clicking Complete/Continue
21. Turn off the ignition switch
22. Keep ignition switch OFF for several seconds
23. Start the engine and let it run at idle
24. Start to perform running-in function. Select Complete/Continue
25. Please do operate according to prompts! Select Complete/Continue
26. Bring the vehicle to a full stop
27. Operate according to prompts. Driving is required during the process.
Select Complete/Continue
28. Start the vehicle within the time countdown indicated by the interface, drive the vehicle and keep the speed at 10Km/h…
29. Drive away and select Complete/Continue
30. Please wait…
31. Bring the vehicle to a full stop. The running-in process requires repeated operations until it is successful. A complete process requires 8 correct running-ins.
32. Wait 30 seconds to cool down the parking brake
33. Please wait…
34. Basic setting completed.
35. The entire process ends.
