LAUNCH VW Air Condition Cooling Door Motor Basically Setting Passat 2009

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

VW Air Condition Cooling Door Motor Basically Setting Passat 2009

Instruction:

After you change the air condition cooling door motor, or replace air condition ECU, you need to do this setting.

Test Model:

WVWJT1******

Steps:

1. Selection “Guide Function”.

2. Select “35-Passat CC 2009>”.

3. Select 2010(A)

4. Select “BWS 3.6L Motronic/220KW”.

5. Confirm the vehicle info, and click OK

6. Select “System Selection”.

7. Select “08 Air Conditioning”.

8. Selection “Climatic”.

9. Select "Basic Setting (Rep Gr 87)"

10. if we replace air condition control unit J301 or replace a new cooling door motor, we must execute basic setting of climatic. Click OK to continue.