LAUNCH Operating Instructions for the Function of BMW CAS 4CAS4+Key Adding

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Operating Instructions for the Function of BMW CAS4/CAS4+Key Adding

Function introduction

Support the functions of Key Adding and All Lost for BMW CAS4/CAS4+Anti-Theft System Module, and 32-digit Engine ISN is required for CAS4+Immobilizer Module All Lost.

Device requirements

PRO and other Android devices of 431 products, X431-G/X431-G3 Immobilizer with key adapter;

Software requirements

BMW V50.54 and above

Steps

The function of CAS4 Immobilizer Module Key Adding is described as below:

1.1 Enter the software, and select [Anti-Theft System]

1.2 Click [OK]

1.3 Enter the Anti-Theft System, and you need to connect with X431-G/X431-G3 Anti-Theft key adapter to perform the next step

1.4 If you don't know the type of the Anti-Theft System, you can select [Intelligent Mode] to enter

1.5 Jump CAS4/CAS4+ Anti-Theft System to the corresponding Anti-Theft system menu

1.6 Click [Preprocessing], you need to preprocess the module to perform Read Anti-Theft data, Key Matching and more. If it has already been preprocessed, you can perform relevant functions. The ECU will be upgraded in this process, and files need to be downloaded online. Please connect to the network in advance