LAUNCH Matching keys for Peugeot and Citroen

Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.

Operating instructions for Peugeot and Citroen Anti-Theft Function

Features：

Key programming

Required devices:

SMARTLINK_HT, X431_PRO_V5, X431 PADV_S, SS_IMP301, etc.

Required software:

Peugeot, Citroen V10.01 and above

Steps：

The following is a detailed introduction to the operation steps of 【Key Programming】 and related precautions.

1. Click the logo of Peugeot and Citroen to enter the software, and then select 【Anti-theft Key Matching】

2. Start scanning the VIN

3. Click “OK” it is recommended to select 【Automatic Scan】mode.

4. Select 【Programming of Keys】 to start the function of key matching

5. Start the process of key matching and click “OK” to go to the next step.

6. Click “OK” to proceed to the next step

7. As shown in the figure below, enter the Anti-theft password. If you don't know the vehicle's Anti-theft password, you can execute the 【Anti-theft Password Reading】function first.

8. The entered password is correct, click “OK” to proceed to the next step.

9. Enter the number of keys to be matched currently the entered number of keys is 2, click “OK” to proceed to the next step.

10. After following the prompt, click “OK” to proceed to the next step

11. Follow the prompt

12. It will prompt as shown below after the key matching is successful. Operate according to the prompt, and then click “OK” to proceed to the next key

matching.