Automotive Scan Tools, Diagnostic Equipment and Torque Calibration Specialists
How To Guide:
Source: LAUNCH TECH CO LTD
LAUNCH FORD Focus 2017 Diesel Particulate Filter Static Regeneration
Just a Heads-Up: This guide is here to help you out, but it’s for general info only. We try to keep everything accurate and reliable, but we can’t promise it’s perfect. So, if you decide to follow this guide, you’re doing it at your own risk. We’re not responsible for any loss or damage that might happen, including indirect or consequential loss, or any loss of data or profits from using this guide. Sometimes, we might link to other websites. We don’t control those sites, so we can’t vouch for their content. Just because we link to them doesn’t mean we endorse them. We do our best to keep this guide running smoothly, but we can’t be held responsible if it’s temporarily unavailable due to technical issues beyond our control.
FORD Focus Diesel Particulate Filter Static Regeneration Method
Supported equipment:
Launch’s full range of comprehensive diagnostic equipment
Current equipment:
PAD V
Function description:
This function is used for diesel particulate filter regeneration to reduce soot load.
Tested models:
Ford/2017/Focus, VIN: WF04XXGCC4HD*****
1. On a PAD V, choose [Local Diagnose].
2. Then, choose [Ford] to test.
3. Choose [Automatically Search] to identify car models automatically.
4. Click [Smart Detection] to scan the entire vehicle systems.
5. Click [PCM (Powertrain Control Module)] to access the system.
6. Click [Special Functions].
7. Click [DPF (Diesel Particulate Filter) Static Regeneration].
8. Click OK. The diesel particulate filter static regeneration is completed.
