AUTOOL AST618 Car Pulsating Brake Oil Exchanger 12V
- Four sub-pumps that change the oil at the same time are quick and labour-saving.
- Adjustable pulse oil change that can effectively clean the pipe and change the oil more thoroughly.
- The powerful recovery function can quickly recover used brake fluid.
- The air intake opening has a water separator and filter device that separates the humidity, avoids mixing with the oil and ensures quality.
- Can be used on European, American and Asian car models.
Note: no need to start the vehicle for the operation.
1. Raise the car to a suitable height so the drive wheels are not on the ground.
2. Connect the four oil pots of the device to the car brake cylinder, and loosen the exhaust screw of the brake cylinder to ensure that oil flows out.
3. Pour in 5L new brake fluid from the fuel filler port of the equipment, and find the matching model connector to connect to the fuel filler of the brake master cylinder.
4. Connect to 12V car power and turn on the power switch button.
5. Press the Vacuum Switch button.
6. Press the Fuel Switch button to change the brake fluid.
7. During the oil changing process, look at the car brake oil tank mouth, if the refuel is too slow, press the acceleration switch button on the device to accelerate refueling; if it’s too fast, press the deceleration switch button to slow down.
8. After the oil change is completed, the used oil in the tank of the equipment must be drained clean. If it’s not emptied clean, the vacuum pump will be damaged and the oil change operation cannot be performed.